OEM & Design Construction

JIANYE fiber optic cable has a construction of optic fiber, loose tube or tight buffer, strength members (FRP, Steel wire, Aramid yarns, Glass yarns,steel strand, etc.), water blocking material (tube jelly, cable jelly, water blocking yarns, water blocking tape, etc.), armor (steel tape, aluminum tape, steel wire armor, FRP armor, etc.), cable sheath (HDPE, AT-PE, LSZH,etc.).Rip cords, color lines of sheat. Meet with all kinds of operating environment.

Reference Standards
JIANYE optical cable meet the international standards of IEC series (such as IEC 60794-1, IEC 60794-2, IEC 60794-3, IEC 60794-4, etc.), and can be supplied according to customers’ requirements of standards such as  EIA/TIA, IEEE,BS EN, etc. JIANYE also can produce optical cable with special requirements including rodent/termite protection, flame retardant, fire resistance, half-dry type,  etc.

Fig-8 Self-supporting Aerial Cable acc. to IEC 60794-4 std.
-Aerial installation along wooden or concrete poles or towers
-Short span self-supporting overhead along telecommunication lines
-Not used along power line for metallic type

ADSS Cable acc. to IEC 60794-4 and IEEE 1222 std.
-Self-supporting overhead along telecommunication or power lines
-Applicable for various customized requirements, and had provide ADSS of maximum fiber count up to 216, maximum span up to 200m, maximum voltage up to 110KV and most critical climate conditions of ice thickness up to 30mm and temperature low to -60℃.
 
3-strand Optical Cable acc. to IEC 60794-3 or IEC 60794-4 std.
-Non-metallic elements as strength member to provide good tensile performance
-Small size and light weight
-Short span self-supporting overhead along telecommunication or power lines
-Applicable for installation in duct.

Easy Branch Fig-8 Self-supporting Aerial Cable acc. to IEC 60794-4 std.
-Optional notch opposite along sheath, convenience for cable stripe
-One fiber per tube, easy to deploy
-Short span self-supporting overhead installed in excess networks

FTTx Cable acc. to IEC 60794-2 std.
-Bending-loss insensitive
-Easy for connection between transmission equipment